Some safety common sense you need to have before operating a ring main unit.
2025-12-12
1. To ensure proper application for electricity usage, assembly, maintenance, and other related tasks, it is best to engage qualified personnel in the country where power is supplied. Do not connect wiring without permission.
2. Install power circuit protection devices on each power module and regularly check these devices for signs of aging.
3. Special measures must be taken to insulate wires and various electrical equipment to prevent electric leakage, especially in areas such as power circuit switches.
4. Do not move electrical appliances to damp locations, nor wipe them with a wet towel.
5. Do not place flammable or explosive materials on or around electrical boxes or power circuit protectors.
6. Regularly inspect the power circuit for signs of deterioration, and remove and replace any power circuits that pose safety hazards to prevent short circuits and fires.
7. In the event of a fire, first cut off the power supply before attempting rescue; do not immediately use water to cut off the power. This can prevent electric shock.
8. When installing oil barriers around power lines, repairing houses, or cutting down trees, effective measures must be taken.
9. Power lines, communication lines, and broadcast lines must be clearly separated. If you find one wire connected to another, you must immediately locate and secure the power source.
10. Do not dig trenches or pits near utility poles; do not dig ponds near utility poles; do not tie livestock to utility poles; do not damage power lines; do not break utility poles—these actions could lead to losses.
11. Do not approach broken wires; send someone to handle the situation and quickly locate and repair the power source.
12. It is prohibited to move temporary electrical equipment such as small water pumps and threshers into the interior of electric furnaces, and to use hook-type electrical cords, twisted-pair cables, ground wires, or waistlines for electrical connections. Minors are prohibited from handling equipment equipped with electrical components, and personnel who have not been certified as qualified by an authorized electrical industry entity are prohibited from operating electrical equipment in practice.
13. Do not use unapproved electrical devices such as lamp holders, lamp cords, switches, or sockets. Electrical and mechanical equipment must be kept clean and free of damage, and lamp cords must not be excessively long or repeatedly pulled back and forth.
14. If you discover someone has been electrocuted, immediately turn off the power switch. Do not attempt to pull the person away with your hands. Instead, use a dry wooden or bamboo object to remove the wire from the victim. Immediately begin artificial respiration or external chest compressions and provide on-site first aid.
15. Personnel not assigned to the substation are prohibited from operating the 10kV ring main unit and from entering the switchgear room to randomly connect or disconnect electrical equipment.